Some tips during mosaic construction process

First of all, the thickness of mosaic is different, from 2 millimeters to 10 millimeters. In order to make the wall flat, sometimes we should consider to find a new flat surface in some low surface.

Secondly, the joint between sheets of mosaic should be the same as the joint of particles. In this way, the whole wall is integrated whole metope, not a mould collage made of pieces of mosaic.

Thirdly, Control the processing pace. In the process of paving mosaic, pulp flow and slipping off always appear. The reason of these is mainly not control processing pace well. the proper way is to wait the cement begin to dry and then begin pave these mosaic on it. The effect will be good.

Fourthly, with joint mixture to jointing. Now, most people use joint mixture to fill joint. With wet white cement to wipe it again first, reoccupy dry cement make it cured as soon as possible, and finally with a dry towel swabbed clean, so that the mosaic is very uniform and more beautiful.
Wants to know more about century mosaic, click here: http://www.aliexpress.com/store/404850